Tips of perfect solid surface installation?

Solid surface Sink are being used more for countertops as well as sinks. The good thing about them is that they are durable, non-porous and provide great finish. But it is important to install them properly and in the following sections we will go through some common installation mistakes that you will have to avoid. Let us have a look at them now.

Common Installation Mistakes to Avoid

Cabinets which are Uneven: Before any solid surface installation such as setting up of countertop is to be done, make sure the surface or cabinet is level as well as even. Prior to every installation properly check with the help of a straight and level edge to make sure surface is even and countertop will not get damaged subsequently.

If required, the countertop should be shimmed up to a level position or the cabinet adjusted to get the required level positioning. If there are any problems then it can easily damage the countertop you are setting up.

Warped Countertops: Many of the solid surfaces are made using 100% acrylic materials which is not vulnerable to few of the common factors which affect wood products in terms of warping of the material. But there are certain other factors which lead to warping of your solid surface installation.

For one thing, you will have to allow the material to get acclimatized to room temperature for about 24 hours before it is unpacked and installed. Additionally, if the material is stored, it should be kept in vertical position instead of a horizontal position if storage is to be done for long duration of time.

In case any type of warping occurs even after taking necessary precautions then you can correct it laying it over level cabinet. Another technique would be using weight or screw on bottom side to hold the material in place till the time warping problem is solved.

Seam Alignment: Providers of solid surface installation in India also mention that normally all seams are sanded as well as pre-fit before they leave the manufacturer's facility. Thus at the time of installation you should make it a point to dry fit it prior to applying the caulk so that joint fits correctly over the cabinet.

Normally the two surfaces align perfectly but sometime it would be necessary to make minor adjustments. After the installation is completed you should check to make sure there are not low or high spots. If you find any problem then a weight or clamp can be used for applying pressure and solving the problem.

Adjust to Room Temperature: Providers of solid surface installationin India also suggest that damage as well as warping risk increase manifold if the material is installed while it is too cold or warm.

In case the surface Sink is too cold then it will have a tendency to break, distort or chip. Thus it is always advisable to store it before installation and let it get adjusted to the room temperature present inside your home.

solid surface sink